2015 June Meeting

[et_pb_section][et_pb_row][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”center”]

2015 June Meeting

(Click The Image For Slide Show)

[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row][et_pb_column type=”1_2″][et_pb_gallery admin_label=”Gallery” gallery_ids=”608,609,610,611,612,613,614,615,616,617,618,619,620,621,622,623,624,625,626,627″ fullwidth=”on” posts_number=”4″ show_title_and_caption=”on” show_pagination=”on” background_layout=”light” /][/et_pb_column][et_pb_column type=”1_2″][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left”]

“Tips Tricks and Jigs”

Peter Toch demonstrated several of his fixtures including one for measuring bowl bottom thickness,  another for steadying your hand while marking the bottom of a bowl.  He also showed his pencil holders.

John O’Connell showed his arraignment for using a cutoff wheel on the lathe, several home made tools for texturing on the lathe and a jig for measuring diameters of shells to fit to the finials.  John also showed his vacuum chuck and an jig for mounting on a chuck to make offset pendants.

Dan Madar showed a lathe mounted tool holder,  a home made chatter tool,  and several gadgets for use at the lathe.

Jim Proffitt wrapped up the evening with a very good explanation and demonstration on Thread Chasing.

[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

Leave a Reply